What To Put Under Gun Safe On Hardwood Floor | Three Viable Protection Methods

Key Takeaways:

  • You can place a rubber mat, a piece of carpet, or a piece of plywood underneath your gun safe to minimize damage.
  • If you have hardwood floors and are in the market for a gun safe, you should avoid getting one that is too heavy.
  • Not all floors can support the weight of a gun safe.
  • You should check the structure of your home's floor before installing a gun safe.

What to put under gun safe on hardwood floor? This is a common question concerning whether the weight of a gun safe would cause damage to hardwood floors. Learn more in this article.

A gun in a safe

What To Put Under Gun Safe On Hardwood Floor to Protect it?

It may be challenging to figure out what to place underneath the gun safe on hardwood floors. However, several options are available to safeguard the gun safe.

A heavy-duty rubber mat is one of the best ways most gun owners can protect the hardwood floor from pressure marks and scratches. However, we will explore some alternative options that are just as effective.

Let's examine 3 options to consider before you place a gun safe on a hardwood floor to minimize damage:

Rubber Mats

Rubber Mats

A thick rubber mat is an excellent alternative to protect hardwood floors. Rubber mats are ideal for protecting hardwood floors from damage caused by heavy metal box. Therefore, any wear and tear will be absorbed by the mat rather than the floor.

We suggest a thick, heavy-duty mat (at least 1 inch) that can support heavy loads. You should have the rubber mat in place. Then, try to keep it in one place as much as possible while you load the safe onto it to avoid leaving marks.


Plywood, ideally at least half an inch thick, is another thing you could put under your safe. You can get plywood at your local hardware store. It will do a great job distributing the weight without damaging the floor underneath.

Piece Of Carpet

Using a piece of old carpet is an additional simple option. The carpet will completely prevent scratches. However, you may need to fold it several times to provide adequate protection against indentation marks. Since the carpet may be damaged during this process, you must use an older or spare carpet.
Grey carpet on the floor

Can You Put a Gun Safe on Wood Floors?

Placing a heavy gun safe directly on a hardwood floor can cause irreversible damage to the floor. Is it even a good idea to keep a gun safe on hardwood flooring, given all the risks involved? If you own a gun safe, we believe it is preferable to keep it on a different type of flooring.

Concrete is preferable because securing the bolts is easier, and scratches will be less noticeable. Additionally, if you ever decide to move the safe in the future, you won't have to worry about replacing the floorboards with hardwood.

Additionally, concrete is less susceptible to mold growth and humidity fluctuations, making it a more practical mold and moist-free option for a gun safe. The best humidity level for a gun is 40 – 60%. When the humidity goes over this level, there is a high chance of corrosion on the metal surface of the gun.

Avoid flooring options such as carpet. If you store gun safes on this surface, you'll cause irreversible damage to the fibers beneath it.

A gun safe

Will My Floor Hold a Gun Safe?

Some people have trouble deciding where to put their safes because of the free-floating space created by a raised floor. A raised floor can support a gun safe. To find a secure location for the gun, you only need to determine the maximum weight the floor can support. High-quality protection for your firearms should be the primary concern rather than focusing on aesthetics.

You can lay out most gun safes on the floor like a table having 4 corners. However, you must take into account the length of the floor joists to achieve stability. Also, you can use some blocking or metal straps to span the floor joist if you prefer.

The best way to deal with a gun safe on a raised floor is to position it as close to a bearing wall as possible. To be more specific, you need to vertically fasten the gun safe to the floor beams and position it close enough to the foundation walls. It provides stability and distributes weight across the floor frame.

Should a Gun Safe Be Bolted to the Floor?

Always anchor your safe to the floor to prevent accidents and damage to your home if it falls over. Unanchored safes can also cause flooring damage. You can avoid carpet tears, scratches, dents, scuffs, and crushed wood if you properly anchor and level your safe. Certain floors require special bases, bolts, and tools to anchor a gun safe perfectly.

If you bolt your safe to the floor, it will be much harder for thieves to pry it open and steal your valuables. It is typically much easier to pry the door off a gun safe if the safe is on its back. That gives you a better chance to pry the door open. Protect your family and your valuables by properly bolting down your safe to prevent would-be thieves.

Can a House Floor Support a Gun Safe, or Does It Need to Be Reinforced?

You probably need a secure place to keep your firearms out of the wrong hands. To accomplish this, you will likely install a gun safe to secure firearms. Safes are available in multiple sizes and weights. However, the most important factor to consider is whether your floor can support the safe's weight.

Gun safes require floor reinforcement as not all floors can handle the weight. Placing braces underneath the floor to support the weight of the safe is an option if the floor cannot handle it. You should hire a professional joiner or builder if you don't know how to do this. The worst thing that could happen is for your gun to fall through the floor.
Opening a safe

Where Should the Safe Be Placed?

Where you will place the safe is the most important factor to consider. The floor may not be able to bear the weight of a heavy safe if you place it in the middle of the room. Placing the safe against the wall is a standard recommendation. Fixing a small personal safe to the wall is the best option, especially if you keep the gun safe in a closet. You will not worry about the gun-safe falling as the wall supports its weight and prevents it from being easily grabbed.

However, you can do this for larger gun safes, too, because that is where the walls of a house provide the most support. The floor receives additional support from the wall, making it possible to place a safe against the wall without worrying about it toppling over. The weights are directed to the floor joists via the walls rather than being concentrated solely on the floor.

Taking a gun out of the drawer


Can You Secure a Safe on a Wooden Floor?

Yes, you can secure a safe on a wooden floor. Installing a gun safe on a hardwood floor offers a stable foundation. Most wood floors will last for decades as they are durable and can be re-finished over time. However, you must install hardwood floors correctly and avoid damaging them with water or humidity.

What Is the Safest Thing to Use on Hardwood Floors?

The safest to use on hardwood floors is a commercial wood cleaning product like Bona or Murphy Oil Soap, certified by the National Wood Flooring Association (NWFA). However, always refer to the manufacturer's guidelines. Additionally, you can create your cleaner by combining one part white vinegar with ten parts warm water. Put in a few drops of Castile liquid soap.

What Should I Put Under My Gun Liberty Safe?

A hard rubber mat placed under your safe before you bolt it down can help prevent damage from moisture. A second option is to use epoxy to seal the concrete floor before installing the safe. 

Is It Possible For Hardwood Floors To Damage The Safe?

Your safe is probably safe on hardwood flooring. Consider setting up the safe on a foundation if you reside in a humid or prone-to-flooding region. You must bolt the safe to the base, which must also be bolted to the floor to allow airflow under the safe to prevent the accumulation of moisture.

Leave a Comment